manualshive.com logo in svg

Hitachi F1500, Руководство по оборудованию

"Hitachi F1500" - мощный и надежный инструмент для профессиональных задач. Для максимальной эффективности, рекомендуется ознакомиться с Hardware Manual. Скачайте руководство бесплатно на manualshive.com и получите всю необходимую информацию для использования этого устройства.

Поделиться
Скачать
background image

port, a host group is created for the Solaris hosts and another host group is
created for the Windows hosts. The appropriate host mode and host mode
options are assigned to each host group. The host modes and host mode
options provide enhanced compatibility with supported platforms and
environments.

The host groups, host modes, and host mode options are configured by using
Device Manager - Storage Navigator. For more information about host
groups, host modes, and host mode options, refer to the 

Provisioning Guide

for Open Systems

.

Device Manager - Storage Navigator

Device Manager - Storage Navigator is the GUI that accesses the features in
the firmware. The GUI is also used to set up and monitor the storage system.
It can be installed on a PC, laptop, or workstation. It communicates via a LAN
to the SVP in the storage system. The SVP obtains storage system
configuration and status information and sends user-initiated commands to
the storage system. The Device Manager - Storage Navigator displays
detailed storage system information and allows users to configure and
perform storage operations on the system.

Device Manager - Storage Navigator is provided as a Java

®

 applet program

that can be executed on any machine that supports a Java Virtual Machine
(JVM). A PC hosting the Device Manager - Storage Navigator software is
called a remote console. Each time a remote console accesses and logs into
the SVP of the desired storage system, the Device Manager - Storage
Navigator applet is downloaded from the SVP to the remote console. The
following figure shows the remote console and SVP configuration for Device
Manager - Storage Navigator.

For more information about Device Manager - Storage Navigator, see the

Hitachi Command Suite Installation and Configuration Guide

 or the 

System

Administrator Guide

.

66

Hardware architecture

Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide

Содержание F1500

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F1500

QNAP TS-130-US User Manual preview
TS-130-US
Бренд: QNAP Страницы: 39
sysmik ICS-709 Installation Notes For Electrical Personnel preview
ICS-709
Бренд: sysmik Страницы: 2
Teknim TWM-1886 Installation & User Manual preview
TWM-1886
Бренд: Teknim Страницы: 10
Sans Digital TOWERRAID TR5M1 Detailed User'S Manual preview
TOWERRAID TR5M1
Бренд: Sans Digital Страницы: 82
UHP UHP-1200 Installation Manual preview
UHP-1200
Бренд: UHP Страницы: 15
Sun Microsystems Sun Fire X2100 M2 Service Manual preview
Sun Fire X2100 M2
Бренд: Sun Microsystems Страницы: 128
IBM 87401RU Installation And User Manual preview
87401RU
Бренд: IBM Страницы: 110
H3C MSR 930 Installation, Quick Start preview
MSR 930
Бренд: H3C Страницы: 4
AIC J4024-02 User Manual preview
J4024-02
Бренд: AIC Страницы: 105
IBM DJSA-210 - Travelstar 10 GB Hard Drive Specifications preview
DJSA-210 - Travelstar 10 GB Hard Drive
Бренд: IBM Страницы: 211
IBM System x3500 M2 Type 7839 Installation And User Manual preview
System x3500 M2 Type 7839
Бренд: IBM Страницы: 126
Gigabyte R292-4S0 User Manual preview
R292-4S0
Бренд: Gigabyte Страницы: 122
Impediment RS-1600-X24 User Manual preview
RS-1600-X24
Бренд: Impediment Страницы: 256
SIERRA VIDEO SYSTEMS Crestron 908012 User Manual preview
Crestron 908012
Бренд: SIERRA VIDEO SYSTEMS Страницы: 32
Jensen of Scandinavia Air:Link 29150 Installation Manual preview
Air:Link 29150
Бренд: Jensen of Scandinavia Страницы: 2
Supermicro SuperServer 1029U-T Series Quick Reference Manual preview
SuperServer 1029U-T Series
Бренд: Supermicro Страницы: 1
Blackberry Enterprise Server 33 Reference Manual preview
Enterprise Server 33
Бренд: Blackberry Страницы: 207
Hama 55051 Operating Instructions Manual preview
55051
Бренд: Hama Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды