manualshive.com logo in svg

Hitachi F1500, Руководство по оборудованию

Поделиться
Скачать
Hitachi F1500 Скачать руководство пользователя страница 165

Mode

Category

Description

Default

MCU/RCU

899

Volume Migration In combination with the SOM 900 setting, whether to

execute and when to start the I/O synchronous copy
change as follows.

Mode 899 = ON:

•

SOM 900 is ON: I/O synchronous copy starts without
retrying Volume Migration.

•

SOM 900 is OFF: I/O synchronous copy starts when the
threshold of Volume Migration retry is   exceeded.
(Recommended)

Mode 899 = OFF (default):

•

SOM 900 is ON: I/O synchronous copy starts when the
number of retries reaches half of the threshold of
Volume Migration retry.

•

SOM 900 is OFF: Volume Migration is retired and I/O
synchronous copy is not executed.

Notes:

1.

This mode is applied when improvement of Volume
Migration success rate is desired under the condition
that there are many updates to a migration source
volume of Volume Migration.

2.

During I/O synchronous copy, host I/O performance
degrades.

OFF

900

Volume Migration In combination with SOM899 setting, whether to execute

and when to start the I/O synchronous copy change as
follows.

Mode 900 = ON:

•

SOM899 is ON: I/O synchronous copy starts when the
threshold of Volume Migration retry is exceeded.

•

SOM899 is OFF: I/O synchronous copy starts when the
number of retries reaches half of the threshold of
Volume Migration retry.

Mode 900 = OFF (default):

•

SOM899 is ON: I/O synchronous copy starts when the
threshold of Volume Migration retry is exceeded.
(Recommended)

•

SOM899 is OFF: Volume Migration is retired and I/O
synchronous copy is not executed.

Notes:

1.

This mode is applied when improvement of Volume
Migration success rate is desired under the condition
that there are many updates to a migration source
volume of Volume Migration.

2.

During I/O synchronous copy, host I/O performance
degrades.

OFF

901

Dynamic Tiering

Dynamic Tiering
for Mainframe

By setting the mode to ON or OFF, the page allocation
method of Tier Level ALL when the drive type of tier1 is
SSD changes as follows.

Mode 901 = ON:

For tier1 (drive type is SSD), pages are allocated until the
capacity reaches the limit. Without consideration of

OFF

System option modes

165

Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide

Содержание F1500

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды