ENGINE (J05E)/TROUBLESHOOTING
2–61
1.
Erase the trouble history and set the starter key to the "LOCK"
position.
2.
Connect the NOx sensor 2 connector.
3.
Set the starter key to the "ON" position.
4.
Check that the NOx sensor 2 communication failure (U029E) is not
detected.
NO
YES
1.
Erase the trouble history and set the starter key to the "LOCK"
position.
2.
Disconnect the DEF sensor connector.
3.
Set the starter key to the "ON" position.
4.
Check that the DEF sensor communication failure (U02A2) is not
detected.
NO
YES
10
Inspect the NOx sensor 2 [HINO DX
Ⅱ
]
SHTS021270300041
Did the NOx sensor 2 communication failure (U029E) disappear?
Go to step 11.
Replace the NOx sensor 2.
Perform After-inspection work. (Clear all past
DTC. Check no DTC is stored after test
drive.)
11
Check the DEF sensor [HINO DX
Ⅱ
]
SHTS021270300042
Did the DEF sensor communication failure (U02A2) disappear?
Procedure completed.
If another CAN communication system DTC
is detected, go to the diagnostic procedure
for the detected DTC.
Perform After-inspection work. (Clear all past
DTC. Check no DTC is stored after test
drive.)
Replace the DEF sensor.
Perform After-inspection work. (Clear all past
DTC. Check no DTC is stored after test
drive.)