ENGINE (J05E)/TROUBLESHOOTING
2–19
INSPECTION
EN01H02127030602016006
1.
PRIOR CHECK
(1)
Set the starter key to the "ON" position (do not start the
engine) and confirm that the SVS (Service Vehicle Soon)
light in the indicator area lights up.
HINT
• If the MIL (Malfunction Indicator Light) is lit, perform a system
check to see if the malfunction is of the past or present.
• In the case of the past malfunction, this light will turn off if a sta-
tus is judged to be normal in 3 times of driving.
• DTC must be cleared on the HINO DX
Ⅱ
, after MIL comes off.
.
(DEFINITION OF 1 TIME OF DRIVING)
a. Begins with engine start and ends with engine shut off.
b. Begins with engine start and ends after four hours of continu-
ous engine-on operation.
c. Begins at end of the previous four hours of continuous
engine-on operation and ends after four hours of continuous
engine-on operation.
d. Begins at the end of the previous four hours of continuous
engine-on operation and ends with engine shut off.
• Since the normal judgement method and time differ accord-
ing to the malfunction code, a proper definition will be
selected from the above 4 definitions.
• If the malfunction indicator light does not go out, the system is
abnormal. Check the system according to diagnosis on the fol-
lowing page.
MALFUNCTION INDICATOR LIGHT ILLUMINATION
PATTERN
MIL
SVS Light
SHTS021270300021
Starter
switch
Engine
Malfunction
indicator
light
Start
ON
OFF
ON
Lock
Running
Stop
TIME
SHTS021270300022