ENGINE (J05E)/TROUBLESHOOTING
2–198
1.
Set the starter key to the "ON" position.
2.
Erase the trouble history using HINO DX
Ⅱ
.
3.
Set the starter key to the "OFF" position.
4.
Set the starter key to the "ON" position again.
5.
Select [Engine] and check if P00AF has been detected.
HINT
Turning the starter key "LOCK" and "ON" verifies the wiping oper-
ation of the VNT actuator (DC motor).
NO
YES
3
Check the operation of the VNT controller [HINO DX
Ⅱ
]
SHTS021270300183
Measurement conditions
Starter key: LOCK
ON
Has DTC P00AF been detected?
Replace the VNT controller.
Perform "After-inspection work" of INFOR-
MATION section.
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.