Hinds Instruments Exicor Gen5 Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 98

Hinds Instruments Exicor Gen5 Скачать руководство пользователя страница 95

Exicor GEN5 User Manual

85

B

Exicor

®

GEN5

Limited Warranty

Hinds Instruments, Inc. warrants the Exicor

®

GEN5 Birefringence measurement

System to be free from defects in materials and/or workmanship for (1) year from the
date of delivery, subject to the provisions contained herein. Hinds’ warranty shall
extend to the original purchaser only and shall be limited to factory repair or
replacement of defective parts.

Exclusions

This warranty does not cover consumable parts, normal maintenance or damage
resulting from improper use or repair, or abuse by the user. This warranty extends
only to repair or replacement, and shall in no event extend to consequential
damages. In the event of user repair or replacement, this warranty shall cover
neither the advisability of the repair undertaken, nor the sufficiency of the repair
itself.
THIS DOCUMENT REFLECTS THE ENTIRE AND EXCLUSIVE UNDERSTANDING
OF THE PARTIES, EXCEPT AS OTHERWISE PROVIDED HEREIN. HINDS
EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
PARTICULARLY THE WARRANTIES OF MERCHANTABILITY AND/OR FITNESS
FOR A PARTICULAR PURPOSE FOR THE PRODUCTS, SOFTWARE, OR
SERVICES CONVEYED. THE OBLIGATIONS SET FORTH IN THIS SECTION
SHALL BE HINDS’ SOLE LIABILITY, AND BUYERS’ SOLE REMEDY, FOR
BREACH OF THE FOREGOING WARRANT. REPRESENTATIONS AND
WARRANTIES MADE BY ANY OTHER PERSON, INCLUDING DISTIBUTORS,
DEALERS AND OTHER INDEPENDENT REPRESENTATIVES OF HINDS WHICH
ARE INCONSISTENT OR IN CONFLICT WITH THE TERMS OF THIS WARRANTY
SHALL NOT BE BINDING ON HINDS UNLESS REDUCED TO WRITING AND
APPROVED BY AN EXPRESSLY AUTHORIZED OFFICER OF HINDS.
This warranty gives you specific legal rights, and you may also have other rights that
vary from state to state.

«
...
93
94
95
96
97
...
»

Содержание Exicor Gen5



































































































Отзывы:

Нет отзывов