Battery
27/36
Slot PLC NPLC-C100 | Hardware Installation
DOC120112UM02EN | Revision 2 | English | 2014-01 | Released | Public
© Hilscher, 2009-2014
6. Insert
Battery
Use a fully charged battery.
Pay attention to the polarity of the battery. In the picture below the
positive pole is on top.
To insert the battery shift it under control of the correct polarity into the
battery holder.
7. Plug in the slot PLC into a free PCI card slot.
8. Fix the slot PLC at the designated drilling hole.
9. Close the PC housing.
10. Reconnect the PC to the mains power and switch it on.
For battery disposal see section
Battery Disposal
on page 34.
