hilscher NPLC-C100, Руководство пользователя

Страница: 19 / 36

Installing Hardware (Slot PLC) 19/36
Slot PLC NPLC-C100 | Hardware Installation
DOC120112UM02EN | Revision 2 | English | 2014-01 | Released | Public
© Hilscher, 2009-2014
5.3 Property Damage Messages
Obey to the following property damage messages, when installing,
uninstalling or replacing the slot PLC NPLC-C100.
5.3.1 Device Destruction by exceeding allowed Supply Voltage
Adhere for all slot PLC NPLC-C100 described in this manual the instruction
hereafter:
Device Destruction!

Use only the permissible supply voltage to operate the slot PLC NPLC-
C100.

Operating the slot PLC NPLC-C100 with a supply voltage above of the
specified range leads to device destruction.
5.3.2 Device Destruction by exceeding allowed Signaling Voltage
Adhere for all slot PLC NPLC-C100 described in this manual the instruction
hereafter:
Device Destruction!

All I/O signal pins at the slot PLC NPLC-C100 tolerate only a specified
signaling voltage!

Operation the slot PLC NPLC-C100 with a signaling voltage other than
the specified signaling voltage may lead to severe damage to the slot
PLC NPLC-C100!
For detailed information on the supply and signaling voltage of the slot PLC
NPLC-C100 described in this manual, refer to section
Technical Data Slot
PLC NPLC-C100-xx on page 29.
5.3.3 Electrostatically sensitive Devices
Adhere to the necessary safety precautions for components that are
vulnerable with electrostatic discharge.
Electrostatically sensitive Devices

To prevent damage to the PC and the slot PLC NPLC-C100, make sure,
that the slot PLC NPLC-C100 is grounded via the endplate and the PC
and make sure, that you are discharged when you install/uninstall the
slot PLC NPLC-C100.