Description and Requirements
15/36
Slot PLC NPLC-C100 | Hardware Installation
DOC120112UM02EN | Revision 2 | English | 2014-01 | Released | Public
© Hilscher, 2009-2014
3.2
System Requirements
3.2.1
System Requirements PC
Windows
®
XP, Windows® 7
PC with PCI connector with 3,3 V or 5 V for hardware revision 4 of
“NPLC C100-xx“
DVD ROM drive
Graphic resolution: min. 1024 x 768 pixel or higher
Keyboard and Mouse
3.3
Requirements for Operation
Note:
For operating a slot PLC NPLC-C100-xx
Update older versions of the
cifX Device Driver
to
V1.1.1.0
.
3.3.1
Slot PLC NPLC-C100-XX
The following requirements must be fulfilled for operation of the slot PLC
with a master functionality:
Firmware
A suitable firmware (for the PLC type) has to be loaded.
License
The slot PLC was ordered with the right and necessary licenses.
Configuration
Die slot PLC must be configured using the configuration software.
Programming
The PLC program must be created with the PLC programming
software and loaded into the slot PLC.
Communication
For communication slave devices for the used communication
system are required.
Table 8: Requirements for Operation of the Slot PLC
