Safety
10/36
Slot PLC NPLC-C100 | Hardware Installation
DOC120112UM02EN | Revision 2 | English | 2014-01 | Released | Public
© Hilscher, 2009-2014
2 Safety
2.1
Safety Instructions
The user manual, the accompanying texts and the documentation are
written for the use of the products by educated personnel. When using the
products, all Safety Messages, Safety Messages, Property Damage
Messages and all valid legal regulations have to be obeyed. Technical
knowledge is presumed. The user has to assure that all legal regulations
are obeyed.
2.2
Intended Use
The slot PLC described in this user manual is a PC card with PLC
functionality and fieldbus communication. Depending from the loaded
firmware, the fieldbus systems listed in the following table can be realized
using the respective slot PLC.
Slot PLC
Fieldbus System
NPLC-C100-DP
PROFIBUS DP Master
NPLC-C100-CO CANopen
Master
NPLC-C100-DN DeviceNet
Master
Table 5: Slot PLC NPLC-C100 and Fieldbus Systems realized thereby
2.3
Personnel Qualification
The PC Card NPLC-C100 must only be installed, configured and removed
by qualified personnel. Job-specific technical skills for people professionally
working with electricity must be present concerning the following topics:
Safety and health at work
Mounting and connecting of electrical equipment
Measurement and Analysis of electrical functions and systems
Evaluation of the safety of electrical systems and equipment
Installing and Configuring IT systems
2.4
References Safety
[S1]
ANSI Z535.6-2006 American National Standard for Product Safety Information in
Product Manuals, Instructions, and Other Collateral Materials
[S2]
IEC 60950-1, Information technology equipment - Safety - Part 1: General
requirements, (IEC 60950-1:2005, modified); German Edition EN 60950-1:2006
[S3]
EN 61340-5-1 and EN 61340-5-2 as well as IEC 61340-5-1 and IEC 61340-5-2
