Battery
26/36
Slot PLC NPLC-C100 | Hardware Installation
DOC120112UM02EN | Revision 2 | English | 2014-01 | Released | Public
© Hilscher, 2009-2014
7.1
Preparation for changing Battery
7.1.1
Safety Messages on Personal Injury
Obey to the following safety messages on personal injury, when installing,
uninstalling or replacing the slot PLC NPLC-C100.
7.1.1.1
Electrical Shock Hazard
Lethal Electrical Shock caused by parts with more than 50V!
HAZARDOUS VOLTAGE inside of the PC or of the connecting device.
Strictly obey to all safety rules provided by the device’s manufacturer in
the documentation!
First disconnect the power plug of the PC or of the connecting device,
before you open the cabinet.
Make sure, that the power supply is off at the PC or at the connecting
device.
Open the PC cabinet and install or remove the slot PLC NPLC-C100 only
after disconnecting power.
7.2
Changing the Battery
1. Pull off the power plug of your PC.
2. Open the housing of your PC.
3. Unmount the slot PLC
4. Pull out the slot PLC from the card slot of your PC.
5. Remove
battery
To remove the battery from its battery holder move it sidewards
