Installing Software
28/142
netPLC C100 | Startup Guide
DOC090701UM02EN | Revision 2 | English | 2009-10 | Released | Public
© Hilscher, 2009
¾
Select
Local Install, Programming System only
, when you want to
install the programming system on one PC and the slot PLC in an other
PC. The programming system can communicate via Ethernet with the
PC with the slot PLC or via USB with the slot PLC.
Figure 6: netPLC auto start – Local Installation
°
The following setups are started one after the other:
bus configuration software
CoDeSys programming system