Bus Diagnostic
117/142
netPLC C100 | Startup Guide
DOC090701UM02EN | Revision 2 | English | 2009-10 | Released | Public
© Hilscher, 2009
13.1.5
Verify Input and Output Data
1. Verify the input and output data with the I/O Monitor
¾
Select in the navigation area
I/O Monitor
.
°
2. Verify the input data with the I/O Monitor
¾
The input data for the uses slave device in the example is on offset 0
and 1.
¾
Change the input data on the PROFIBUS-DP slave device. The data is
transferred via PROFIBUS to the master.
°
The I/O Monitor shows the input data on offset 0 and 1.