Safety
17/142
netPLC C100 | Startup Guide
DOC090701UM02EN | Revision 2 | English | 2009-10 | Released | Public
© Hilscher, 2009
2.8
Safety Instructions USA
This manual contains instructions which must be observed to ensure your
own personal safety and to avoid damage to devices.
2.8.1
Electrical Shock Hazard
Electrical Shock Hazard
HAZARDOUS VOLTAGE inside of the PC or of the connecting device.
Therefore first disconnect the power plug of the PC or of the connecting
device.
Make sure, that the power supply is off at the PC or at the connecting
device.
Open the PC cabinet and install or remove the
XXX
card only after
disconnecting power.
2.9
Property Damage Messages USA
This manual contains instructions which must must be red, understod and
observed to avoid damage to devices.
2.9.1
Electrostatically sensitive Devices
Adhere to the necessary safety precautions for components that are
vulnerable with electrostatic discharge (EN 61340-5-1 and EN 61340-5-2
as well as IEC 61340-5-1 and IEC 61340-5-2).
Electrostatic Discharge
This equipment is sensitive to electrostatic discharge, which cause
internal damage and affect normal operation. Follow guidelines when you
handle this equipment.
Observe the necessary safety precautions when handling components
that are vulnerable to electrostatic discharge.
