Installing Software
27/142
netPLC C100 | Startup Guide
DOC090701UM02EN | Revision 2 | English | 2009-10 | Released | Public
© Hilscher, 2009
6 Installing Software
The software installation installs the following components:
•
CoDeSys programming system (with 3S Gateway and bus configuration
software)
•
Device Driver (cifX Device Driver) and the
•
netPLC CoDeSys Server.
1. Insert the netPLC DVD into your local DVD ROM drive.
2. Select
CoDeSys V3
of the auto start menu.
Note:
Administrator privileges are required on Windows
®
XP systems for
installation!
3. Select installation amount
Three selection are available:
¾
Select
Full Install, Programming System, PC card driver and server
,
when you want to install the programming system and the slot PLC in
the same PC.
Figure 5: netPLC auto start – Full Installation
°
The following setups are started one after the other:
bus configuration software
CoDeSys programming system
device driver (cifX Device Driver)
netPLC CoDeSys Server
