Hill-Rom VersaCare P3200 Скачать руководство пользователя страница 43

Страница: 43 / 379

Function Checks

Chapter 2: Troubleshooting Procedures

Yes

↓

→

Go to RAP 2.1 on page 2-13

go to RAP 2.16 on page 2-28.

21. Continue to hold the CPR handle.

The bed continues into the Trendelenburg position.

Yes

↓

→

Go to RAP 2.1 on page 2-13 or go to RAP 2.16 on page 2-28.

22. Release the CPR handles and operate the head section up to check that the

head section motor drive mechanism is working correctly.

The head section rises without any problem or abnormal noise.

Yes

↓

→

Go to RAP 2.1 on page 2-13

go to RAP 2.16 on page 2-28.

23. Set the brakes. Try to move the bed.

The four wheels are locked and prevent any movement.

Yes

↓

→

Replace affected caster.

24. Set the brake/steer pedal to the Steer position and trigger the lengthways

locking of the steer caster (non-IntelliDrive® Transport System beds).

The caster locks in the expected position.

Yes

↓

→

Replace affected caster.

25. Go to “Final Actions” on page 2-12.

VersaCare™ Bed Service Manual (MAN333 REV 2)

Page 2 - 9

Содержание VersaCare P3200




























































































































































































































































































































































































Результаты поиска

Содержание VersaCare P3200

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom VersaCare P3200, Руководство по обслуживанию

Результаты поиска

Содержание VersaCare P3200

Отзывы:

Бренды по названию

Популярные бренды