Hill-Rom VersaCare P3200 Скачать руководство пользователя страница 148

Страница: 148 / 379

4.5 Intermediate Siderail
Chapter 4: Removal, Replacement, and Adjustment Procedures

4.5 Intermediate Siderail

Tools required:

Screwdriver
E-ring installation tool
Rubber mallet

Removal

1. Set the brakes.

2. Raise the bed to the high position.

3. Raise the knee section to the highest position.

4. Raise the siderail being changed to the up and locked position.

SHOCK HAZARD:

Unplug the bed from its power source. Failure to do so could result in
personal injury or equipment damage.

5. Unplug the bed from its power source.

Remove the E-ring (A) and washer (B) from the siderail dampener (C) (see
figure 4-8 on page 4-17).

7. Disconnect the dampener (C) from the mounting post (D).

8. Remove the head end E-ring (E) from the lower D-pin (F).

9. Remove the head end E-ring (G) from the upper D-pin (H).

10. Unlatch the siderail.

11. Remove the lower D-pin (F).

12. While supporting the siderail, remove the upper D-pin (H).

NOTE:

The right side D-pin bushing will come off the D-pin.

Page 4 - 16

VersaCare™ Bed Service Manual (MAN333 REV 2)

Содержание VersaCare P3200




























































































































































































































































































































































































Результаты поиска

Содержание VersaCare P3200

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom VersaCare P3200, Руководство по обслуживанию

Результаты поиска

Содержание VersaCare P3200

Отзывы:

Бренды по названию

Популярные бренды