manualshive.com logo in svg

Hill-Rom VersaCare P3200, Руководство по обслуживанию

Поделиться
Скачать
Hill-Rom VersaCare P3200 Скачать руководство пользователя страница 235

4.33  Battery—IntelliDrive® Transport System 

Chapter 4: Removal, Replacement, and Adjustment Procedures 

11. Remove the four screws (H) securing the retaining bracket (I) to the drive 

box. 

12. Remove the retaining bracket (I). 

13. Remove the four screws (J) securing the end plate (K) to the drive box. 

14. Remove the end plate (K). 

15. Remove the screws (L) securing the cables (M) to the batteries (N). 

WARNING: 

If battery fluid touches skin or clothing, immediately wash it off with 
clean water. If battery fluid c gets in the eyes, immediately flush them 
with water and consult a physician. Failure to do so could result in 
personal injury. 

16. Remove the batteries (N) from the drive box. 

17. Dispose of the batteries according to local regulations. 

Replacement 

1.  Do the removal procedure in reverse order. 

WARNING: 

Ensure the black wire on the battery is connected to the negative 
terminal on the battery and the red wire is connected to the positive 
terminal on the battery. Failure to do can result in personal injury or 
equipment damage. 

2.

 

Connect the black wire to the negative terminal and the red wire to the 
positive terminal on the battery. 

3.

 

To make sure the VersaCare™ Bed operates correctly, do the “Function 
Checks” on page 2-6. 

4 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Page 4 - 103 

Содержание VersaCare P3200




























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды