Hill-Rom VersaCare P3200 Скачать руководство пользователя страница 139

Страница: 139 / 379

4.2 Caster

Chapter 4: Removal, Replacement, and Adjustment Procedures

Replacement

NOTE:

The new caster comes in the

neutral

position.

1. For foot end casters, do the following:

a. Using the brake/steer pedal (E), set the caster to the brake position.

Position the new caster so the alignment pin (O) will fit into the slot

(P).

c. Insert the caster (F) into the bed.

d. Install the brake/steer pedal (E) through the caster (F) and clamp (D).

e. Tighten the nut (C).

f. Install the foot end cover (B).

g. Install the screw (A) to secure the foot end cover (B) to the bed.

To make sure the VersaCare™ Bed operates correctly, do the

“Function Checks” on page 2-6.

2. For head end casters, do the following:

a. Using the brake/steer pedal (E), set the caster to the brake position.

Position the new caster so the alignment pin (O) will fit into the slot

(P).

c. Insert the caster (N) into the bed.

Install the brake/steer pedal (M) through the caster (N) and clamp (L)

into the torque tube (J).

e. Tighten the setscrew (I).

f. Tighten the nut (K).

g. Install the head end cover (H).

h. Install the screw (G).

To make sure the VersaCare™ Bed operates correctly, do the

“Function Checks” on page 2-6.

VersaCare™ Bed Service Manual (MAN333 REV 2)

Page 4 - 7

Содержание VersaCare P3200




























































































































































































































































































































































































Результаты поиска

Содержание VersaCare P3200

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom VersaCare P3200, Руководство по обслуживанию

Результаты поиска

Содержание VersaCare P3200

Отзывы:

Бренды по названию

Популярные бренды