manualshive.com logo in svg

Hill-Rom VersaCare P3200, Руководство по обслуживанию

Поделиться
Скачать
Hill-Rom VersaCare P3200 Скачать руководство пользователя страница 271

Warranty 

Chapter 5: Parts List 

Warranty 

HILL-ROM COMPANY, INC. 

LIMITED WARRANTY 

Hill-Rom Company, Inc. (Hill-Rom) has a long tradition of providing superior products and service to our customers. Our 
goal is “Total Customer Satisfaction”. In that spirit, Hill-Rom is proud to offer the following warranty. 

GENERAL WARRANTY (APPLICABLE UNLESS A SPECIFIC WARRANTY IS LISTED) 

Hill-Rom warrants to the original purchaser that its products and replacement parts shall be free from defects in material and 
workmanship for a period of one (1) year from date of delivery. Hill-Rom’s obligation under this warranty is expressly 
limited to supplying replacement parts and/or service for, or replacing, at its option, any product which is, in the sole 
discretion of Hill-Rom, found to be defective. In addition to the foregoing one year warranty, Hill-Rom warrants to the 
original purchaser that the frame and welds on its products will be free from structural defects for the life of the product. Any 
product upgrade or modification initiated by Hill-Rom does not affect the original product warranty. 

SPECIFIC WARRANTIES 

MATTRESS WARRANTIES 

Hill-Rom warrants to the original purchaser that its mattress product shall be free from defects in material and workmanship 
for a period of two (2) years from date of delivery. However, electro mechanical mattress components (compressors, valves, 
printed circuit boards, hoses, and couplers) are covered by the general one (1) year warranty. 

EXPENDABLES WARRANTIES 

A sixty (60) day limited warranty from date of delivery applies to expendable parts such as cushions, coverlets, software 
diskettes, locator badge batteries, dome light incandescent bulbs, overhead fluorescent tubes, heating elements, temperature 
probes, filter sheets, and microspheres. This warranty is limited to replacement of the parts covered. 

TO OBTAIN PARTS AND SERVICE 

In the United States, call Hill-Rom Technical Support Department at (800) 445-3720, Monday through Friday. In Canada, 
call Hill-Rom Technical Support Department at (800) 267-2337, Monday through Friday. Outside the United States and 
Canada, call your authorized Hill-Rom Distributor. In order to expedite service, we request you furnish the following 
information: customer identification number, product model number, serial number, and description of problem. A qualified 
specialist will provide, via telephone (United States and Canada), or FAX (Outside the United States and Canada), 
troubleshooting assistance for facility personnel and provide necessary parts to make repairs. If troubleshooting determines 
the need for on-site technical service, a qualified service representative will be dispatched. Replacement of non-technical 
items will be the responsibility of the customer. If requested by Hill-Rom, products or parts for which a warranty claim is 
made shall be returned prepaid to Hill-Rom’s factory. 

OUT OF WARRANTY EXCHANGE POLICY 

After the expiration of the original warranty, upon request, Hill-Rom will ship as a replacement, components such as selected: 
motors and printed circuit boards, for like units returned to Hill-Rom by the original purchaser at a substantial savings. Please 
call Hill-Rom Technical Support Department for current pricing. 

PARTS AVAILABILITY POLICY 

Hill-Rom will offer parts for new and remanufactured products for ten (10) years from date of sale; for communications

products for five (5) years from date of sale.

Note: Some original component parts and assemblies may not be available; functional equivalents may be substituted.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES 

AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS OF PURPOSE. HILL-ROM’S OBLIGATION UNDER THESE 

WARRANTIES SHALL NOT INCLUDE ANY LIABILITY FOR LOSS OF PROFITS, DIRECT, INDIRECT OR 

CONSEQUENTIAL DAMAGES OR DELAYS

. Some states, provinces, or countries do not allow the exclusion or 

limitation of incidental or consequential damages, so the above exclusion or limitation may not apply. Any improper or 

negligent use, any alterations or repairs not in accordance with Hill-Rom’s manuals or performed by others in such manner as 

in Hill-Rom’s sole judgment affects the product materially and adversely, shall void these warranties. These warranties do not 

cover failures due to misuse, abuse, neglect, or lack of routine maintenance. No employee or representative of Hill-Rom is 

authorized to change these warranties in any way or grant any other warranty unless in writing and signed by a Hill-Rom 

officer. These warranties provide specific legal rights; but, there may be other available rights, which vary from state to state, 

province to province, or country to country.

Revised July 6, 2001

Hill-Rom Company, Inc., 1069 State Route 46 E, Batesville, IN 47006-9167 

5 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Page 5 - 5 

Содержание VersaCare P3200




























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды