manualshive.com logo in svg

Hill-Rom VersaCare P3200, Руководство по обслуживанию

Поделиться
Скачать
Hill-Rom VersaCare P3200 Скачать руководство пользователя страница 221

4.28  Obstacle Detect 

Chapter 4: Removal, Replacement, and Adjustment Procedures 

4.28  Obstacle Detect 

Tools required:

 

T25Torx®

1

 screwdriver 

Small screwdriver 

Removal 

1.  Set the brakes. 

SHOCK HAZARD: 

Unplug the bed from its power source. Failure to do so could result in 
personal injury or equipment damage. 

2.  Unplug the bed from its power source. 

3.  For the head end detectors, do the following: 

a.

 

Remove the screw (A) and fastener (L) securing the head end cover (B) 
to the bed (C) (see figure 4-46 on page 4-90). 

b.  Remove the head end cover (B). 

c.

 

Using the small screwdriver under the snaps, carefully remove the 
obstacle detect cover (D). 

d.

 

For new model obstacle detect covers, remove the screw (M) from the 
obstacle detect cover (D). 

e.  Remove the P.C. board (E) from the cover (D). 

f.  Disconnect the cable (F) from the P.C. board (E). 

4.  For the foot end detectors, do the following: 

a.

 

Remove the screw (G) and fastener (L) securing the foot end cover (H) 
to the bed (C) (see figure 4-47 on page 4-91). 

b.  Remove the foot end cover (H). 

c.

 

Using the small screwdriver under the snaps, carefully remove the 
obstacle detect cover (I). 

d.

 

For new model obstacle detect covers, remove the screw (N) from the 
obstacle detect cover (I). 

e.  Remove the P.C. board (J) from the cover (I). 

f.  Disconnect the cable (K) from the P.C. board (J). 

1. Torx® is a registered trademark of Textron, Inc. 

4 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Page 4 - 89 

Содержание VersaCare P3200




























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды