manualshive.com logo in svg

Hill-Rom FE5000, Руководство по эксплуатации и обслуживанию, Страница: 46 / 108

Поделиться
Скачать
Hill-Rom FE5000 Скачать руководство пользователя страница 46

Function Checks
Chapter 2: Troubleshooting Procedures

Page 2 - 4

Electrically Operated General Ward Bed 

Operation and Maintenance Manual 

(154588 REV 1)

9. Press the 

Knee Up

 control.

The knee section rises to the high position without stopping or the audible 
alarm sounding. 

Yes

No

Go to RAP 2.3.

10. Press the 

Knee Down

 control.

The knee section goes down to the low position without stopping or the 
audible alarm sounding. 

Yes

No

Go to RAP 2.3.

11. Press the 

Head Up

 control.

The head section rises to the high position without stopping or the audible 
alarm sounding. 

Yes

No

Go to RAP 2.1.

12. Press the 

Head Down

 control.

The head section goes down to the low position without stopping or the 
audible alarm sounding. (Do not consider the knee section motor.)

Yes

No

Go to RAP 2.5.

13. Press the 

Head Down

 control.

The head section goes down, then the knee section continues to drop when 
the head section reaches the low position. 

Yes

No

Go to RAP 2.5.

14. Unplug the power from the power source and test the functions checked in 

step 12 to step 14.
The bed functions operate correctly. 

Yes

No

Go to RAP 2.6.

15. Press the 

Head Up

 

control until the section reaches the high position.

NOTE:

Someone should be on the bed so that this test can be carried out conclusively.

16. Pull one of the 

CPR

 control handles.

Содержание FE5000













































































































Отзывы:

Нет отзывов