Hill-Rom DuraStar Series Скачать руководство пользователя страница 160

Страница: 160 / 165

7.7 Push Handles

Chapter 7: Accessories

DuraStar™ Series Stretcher Service Manual (man268)

Page 7 - 13

7.7

Push Handles

Tools required:

3/16" Allen™

wrench bit

Phillips head screwdriver

1/4" drive

Torque wrench

Ratchet

The push handles are located at the head end of the stretcher. They increase the
caregiver’s control over the stretcher during transport. The push handles fold
down and out of the way when not in use.

Installation

1. Using the phillips head screwdriver, install two screws (E) to secure the

push release handle (D) to the right-hand push handle latch assembly (C)
(see figure 7-7 on page 7-13).

Figure 7-7. Push Handle Installation

2. Using the ratchet, the 1/4" drive ratchet, and the 3/16" Allen™ wrench bit,

install the shoulder screw (B) through the right-hand push handle latch
assembly (C) and into the upper frame.

Allen™ is a trademark of Industrial Fasteners Inc.

m268_047

Содержание DuraStar Series






































































































































































Результаты поиска

Содержание DuraStar Series

Отзывы:

Hill-Rom DuraStar Series, Руководство по обслуживанию, Страница: 160 / 165

Результаты поиска

Содержание DuraStar Series

Отзывы: