manualshive.com logo in svg

Hill-Rom DuraStar Series, Руководство по обслуживанию, Страница: 15 / 165

Поделиться
Скачать
Hill-Rom DuraStar Series Скачать руководство пользователя страница 15

Introduction

Chapter 1: Introduction

Page 1 - 6

DuraStar™

 

Series Stretcher Service Manual (man268)

Introduction

General Description

The DuraStar™ Series Stretcher is available in two models: fixed height and 
hydraulic. Both models are mounted on casters to move easily, have 
pneumatic-assisted back sections that rise to 90°, and have non-marring 
bumpers on corners and siderails. The hydraulic model also has two hydraulic 
cylinders mounted vertically in twin towers on the base. They enable manually 
operated, variable-height, top surface and Trendelenburg positions. 

Operating Precautions

Before operating the stretcher, ensure you have read and understand in detail 
the contents of this manual. It is important that you read and strictly adhere to 
the safety information contained in this manual and the applicable user 
manuals.

Stretcher Positions

The DuraStar™ Series Stretcher has a pneumatic-assisted back section. The 
stretcher positions are shown in figures 1-5 through 1-9.

 
.

Содержание DuraStar Series






































































































































































Отзывы:

Нет отзывов