HIKVISION 607 Series Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 163

HIKVISION 607 Series Скачать руководство пользователя страница 50

607 Series Face Recognition Terminal

User Manual

40

completely, authenticate the face when the prompt “Continue to authenticate” pops up.
If authentication succeeded, the prompt “Authenticated” will pop up.

Notes:



For better face authentication, the user height should between 140 cm and 190 cm and the
distance between the user and the device should be between 30 cm and 100 cm.



For detailed information about scanning fingerprint, see Appendix A Tips for Scanning
Fingerprint.



For detailed information about authenticating face, see Appendix B Tips When
Collecting/Comparing Face Picture.

6.7.2

Authenticating via 1:N Matching

If the authentication mode is Face, position the face looking at the camera to start face
authentication.
If authentication completed, a prompt “Authenticated” will pop up.

6.7.3

Authenticating via 1:1 Matching and 1:N Matching

Steps:
1.

If the authentication mode is Fingerprint and Face, authenticate fingerprint first according to
the prompt on the device screen.
The device will compare the fingerprint with the fingerprint information in the device database
(1:N Matching).
If authentication completed, a prompt “Continue to authenticate” will pop up.

2.

Front the face looking at the camera to start face authentication.
The device will compare the captured face picture with the user information gained from the
last step (1:1 Matching).
If authentication completed, a prompt “Authenticated” will pop up.

Notes:



For better face authentication, the user height should between 140 cm and 190 cm and the
distance between the user and the device should be between 30 cm and 100 cm.



For detailed information about scanning fingerprint, see Appendix A Tips for Scanning
Fingerprint.



For detailed information about authenticating face, see Appendix B Tips When
Collecting/Comparing Face Picture.

6.8

Two-way Audio

Purpose:
After adding the device to the iVMS-4200 client software, you can call the device from the client
software, call the master station from the device, call the client software from the device, or call
the indoor station from the device.

«
...
48
49
50
51
52
...
»

Содержание 607 Series




































































































































































Отзывы:

Нет отзывов