HIKVISION 607 Series, Руководство пользователя, Страница: 32 / 163

607 Series Face Recognition Terminal User Manual
22
Note: Numbers, upper case letters, lower case letters, and special characters are allowed in the
Wi-Fi password.
5. Tap OK to save the settings and go back to the Wi-Fi tab.
6. Tap to save the Wi-Fi parameters and go back to the Home page.
Setting RS-485 Parameters
Purpose:
The face recognition terminal can connect external access controller, secure door control unit or
card reader via the RS-485 terminal.
Steps:
1.
On the Communication Settings page, tap RS-485 to enter the RS-485 tab.
2. Select an external device according to your actual needs.
Note: Controller represents the access controller, Unit represents the secure door control unit
and Reader represents the card reader.
3. On the Communication Settings page, select an RS-485 address.
4. Tap
√
to save the RS-485 parameters and go back to the home page.
Note: If you change the external device, and save the device parameters, the device will reboot
automatically.
Setting Wiegand Parameters
Purpose:
You can set the Wiegand transmission direction.