HIKVISION 607 Series, Руководство пользователя, Страница: 120 / 163

607 Series Face Recognition Terminal User Manual
110
1) Select the cards to add as first card for the door
Note: Set the card permission and apply the permission setting to the access control
device first. For details, refer to Chapter 7.7 Permission Configuration.
2) Click OK button to save adding the card.
5. You can click Delete button to remove the card from the first card list.
6. Click Save to save and take effect of the new settings.
7.8.5 Anti-Passing Back
Purpose:
You can set to only pass the access control point according to the specified path and only one
person could pass the access control point after swiping the card.
Notes:

Either the anti-passing back or multi-door interlocking function can be configured for an access
control device at the same time.

You should enable the anti-passing back function on the access control device first.
Steps:
1.
Click Anti-passing Back tab to enter the following interface.
2. Select an access control device from the device list on the left.