HIKVISION 607 Series, Руководство пользователя, Страница: 126 / 163

607 Series Face Recognition Terminal User Manual
116
Access Control
Point
Access Control Point
The door status of open, close, remain open, and
remain closed will be triggered.
Notes:

The door status of open, close, remain open,
and remain close cannot be triggered at the
same time.

The target door and the source door cannot be
the same one.
4. Click Save to save and take effect of the parameters.
Card Linkage
Steps:
1.
Click to select the linkage type as Card Linkage.
2. Input the card No. or select the card from the dropdown list.
3. Select the card reader from the panel for triggering.
5. Click different tabs to set different parameters. Switch the property from to to
enable this function.
You can set the parameters of buzzer, recording, alarm output, and access control point.
Linkage Type Linkage Target Descriptions
Buzzer
Host Buzzer
The audible warning of controller will be
triggered.
Card Reader
Buzzing
The audible warning of card reader will be
triggered.
Recording Capture Status The real-time capture will be triggered.
Alarm Output Alarm Output
The alarm output will be triggered for
notification.
Access Control
Point Access Control
Point
The door status of open, close, remain open,
and remain closed will be triggered.
Notes:

The door status of open, close, remain
open, and remain close cannot be
triggered at the same time.

The target door and the source door
cannot be the same one.
4. Click Save to save and take effect of the parameters.
7.11
Door Status Management
Purpose:
The door status of the added access control device will be displayed in real time. You can check the
door status and the linked event(s) of the selected door. You can control the status of the door and
set the status duration of the doors as well.