HIKVISION 607 Series, Руководство пользователя, Страница: 24 / 163

607 Series Face Recognition Terminal User Manual
14
Chapter 5
Activation
Purpose:
You are required to activate the terminal first before using it.
Activation via device, activation via SADP, and activation via client software are supported.
The default values of the control terminal are as follows.

The default IP address: 192.0.0.64.

The default port No.: 8000.

The default user name: admin.
5.1
Activating via Device
If the device is not activated, you can activate the device after it is powered on.
Steps:
1.
Tap the Password field and create a password.
2. Tap the Confirm field and input the password again.
3. Tap Next and the device will be activated.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
5.2 Activating via SADP Software
Purpose:
SADP software is used for detecting the online device, activating the device, and resetting the
password.
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts. Follow the steps to activate the device.
Steps:
1.
Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an inactive device.