Fault
Probable cause
Action
Add-on equipment does not work
properly (rotator, hoist, etc.)
Connectors not
properly connected.
Reconnect the add-on
equipment, according to
the instructions.
Other defect.
Go to a HIAB service
workshop.
When using feature CTC: The feature
is not behaving as usual, or the first
boom seems to be locked in the
same position during operation.
The button
for
manual control of the
first boom has been
pushed.
Push button
again.
This will give CTC
control over the boom
system.
8.6.3. Display [option]
The display has three menu items:
Error codes, Timers &
Counters and VSL. These items are shown on the screen
when the display is first engaged. To be able to select an
item push the menu toggle button or the OK button. In the
bottom left of the screen the name of the item currently
highlighted is shown.
Buttons
(1) Push to go back to main menu
(2) Push to go back one step
(3) Push to toggle between menu items
(4) Push to select item
Menu items
Error codes
If item
Error codes is selected and there are errors present in the system the screen will show a
three digit number for each fault in the system.
Timers & Counters
When item is selected information is shown about:
• Total time - Number of hours that the crane has been
engaged
• Use time – Number of hours that dump valve has been
active
• Lift count – Number of lifts made
• Time to service – Number of hours with the crane
engaged until next service
• Use time to next service – Number of hours with dump
valve active until next service
• Lifts to service – Number of lifts until next service
Timers & Counters
Maintenance and Service
108
HIAB K-HiPro 285-425 X4