www.hi-velocity.com
© 1995-2017 Energy Saving Products Ltd.
Designed specifically for use with the Hi-Velocity Systems
TM
product line, the Hi-Velocity Air Purification System gives
consumers unsurpassed indoor air quality.
Three powerful technologies in one
Air Purification System:
• Electrostatic MERV-13 Filter Removes Allergens
• Photo-Catalytic Oxidation destroys toxic chemicals
and eliminates household odors
• Ultraviolet Light Kills Disease Germs on Contact
Our one-size-fits-all design allows for easy applications on
any Hi-Velocity System. See our website (www.hi-velocity.com)
for Brochure and Installation Module.
MERV-13 Filter: Change every 6 months.
Ultraviolet Lamps: Change every 12 months.
Hi-Velocity Air Purification System
Options & Add-Ons
Module OPT
Add-Ons & Third Party Options (1/2)
Module OPT Add-Ons & Third Party Options (1/2)
The Turbo Meter provides uncommon accuracy, sensitivity,
and pocket-sized convenience. It is based on the principle that a
freely turning turbine will rotate at a speed directly proportional to
the wind speed. To insure maximum sensitivity and accuracy, the
turbine is suspended on sapphire jewel bearings, and its rotation
is sensed by an infrared light beam which adds no friction. The
resulting signal is processed electronically by an LSI (Large Scale
Integrated) circuit for improved reliability and reduced size. A
special three digit display is used for extra resolution and provides
excellent viewing contrast in bright sunlight. A handy switch selects
between four different scales —knots, feet per minute, meters per
second, and miles per hour — for unmatched versatility. Unit is
compact size (2.6 x 4.7”, 7x 12cm) and light weight ( 3oz., 85g).
Measures wind speed from 0 - 99.9 mph. Available from Energy
Saving Products, or directly from Davis Instruments.
Turbo Meter™ from Davis Instruments
Fig. OPT-02 - Filter Rack and Filter
Available from Energy Saving Products is a 3”
(76mm)
Filter
Rack. Filters are 1”
(25mm)
thick Merv 3, and the filter medium is
approximately 14% efficient. Any after market filter may be used
with the Hi-Velocity Filter Rack. (See Dimensions Below) Ensure
that there is always a filter in place, and check every month to
ensure that the filter is clean. To clean the filter, remove from
system, wash the white side and vacuum the colored side. Once
the filter has been washed, vacuumed and completely dried,
replace in system (colored side to face the fan coil).
Filter Rack (Optional)
Hi-Velocity Portable Air Purification System
Also available is our P-20 Portable Hi-Velocity Air Purification
System. This powerfully advanced stand-alone system has 5
steps to give you the cleanest air possible:
•
Step 1: A Treated Pre-filter removes all particles from the
air larger than 5 microns.
•
Step 2: A hospital grade HEPA Filter removes allergens so
small they can only be seen by a microscope.
•
Step 3: A specially formulated Gas Absorption Media
removes toxic fumes.
•
Step 4: “Photo-Catalytic Oxidation” destroys toxic
chemicals and eliminates household odors.
•
Step 5: Ultraviolet light 10,000 times the intensity of
sunlight kills viruses and bacteria on contact.
Electronic sensors monitor air quality and automatically
increase air purifier performance to compensate for periods of
usually high chemical activity or during periods of high particle
counts.
-40-
Filter Dimensions
Unit
50
70
100
Dim.
1
4” X 1” X 18”
(355mm x 25mm x 457mm)
18” X 1” X 18”
(457mm x 25mm x 457mm)
24” X 1” X 18”
(609mm x 25mm x 457mm)
Fig. OPT-01 - ESP Filter
