Hewlett Packard Enterprise HPE ProLiant DL580 Gen10, Руководство пользователя

Страница: 123 / 197

Identifying the processor type
The processor type installed in the server is briefly displayed during POST. To view this information and additional
processor specifications, do the following:
Procedure
1. Reboot the server.
The server restarts and the POST screen appears.
2. Press F9.
The System Utilities screen appears.
3. Select System Information | Processor Information.
The Processor Information screen shows detailed information about the processors installed in the server.
4. Press Esc until the main menu is displayed.
5. Select Reboot the System to exit the utility and resume the boot process.
Installing a processor
The server supports installation of 1–4 processors. Single-processor configurations are supported in servers with only a
six-slot riser installed in the primary riser cage.
IMPORTANT: Existing HPE ProLiant and HPE Synergy Gen10 server products containing first-generation Intel
Xeon Scalable processors may not be upgraded to second-generation Intel Xeon Scalable processors at this time.
For more information, see the product QuickSpecs on the Hewlett Packard Enterprise website ( https://
www.hpe.com/info/qs).
Hewlett Packard Enterprise recommends identifying the processor heatsink module components (
Processor, heatsink,
and socket components) before performing this procedure.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• The components included with the hardware kit.
• T-30 Torx screwdriver.
• A T-10 Torx screwdriver might be needed to unlock the access panel.
Procedure
1.
Observe the following alerts:
CAUTION: When handling the heatsink, always hold it along the top and bottom of the fins. Holding it from
the sides can damage the fins.
CAUTION: To avoid damage to the processor or system board, only authorized personnel should attempt to
replace or install the processor in this server.
Hardware options installation
123