Hewlett Packard Enterprise Apollo 4200 Gen10, Руководство пользователя

Страница: 80 / 159

Processor 2 (required)
PCIe slot and card length Description
Slot 5 - 1/2 length/Half-height (½L/HH) PCIe3 x8 (8, 4, 2, 1)
Slot 6 - 1/2 length/Half-height (½L/HH) PCIe3 x24 (32, 16, 8, 4, 2, 1)
Slot 7 - 1/2 length/Half-height (½L/HH) PCIe3 x16 (16, 8, 4, 2, 1)
Installing an expansion board or type -p controller
CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before beginning
any installation, removal, or replacement procedure. Improper grounding can cause electrostatic discharge.
CAUTION: For proper cooling, do not operate the system without the access panel, baffles, expansion slot covers, or
blanks installed.
The steps shown apply to both installing an expansion board and installing a type -p controller.
Procedure
1.
Power down the system (
Power down the system).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3.
Remove the system from the rack (
Remove the system from the rack).
4.
Place the system on a flat, level work surface.
5. Remove the access panel ( Remove the access panel).
6. Remove the air baffle ( Remove the air baffle).
7. If you are installing an expansion board in PCIe slots 5, 6, or 7, remove the air blocker for those slots ( Remove the air
blocker from PCIe expansion slots 5–7).
8. To install a low-profile, standup expansion board or type -p controller on the system board, do the following:
a. If the option ships with a full-height bracket, remove that bracket and attach a low profile one. For more information,
see the documentation that ships with the option.
b. Remove the onboard PCIe expansion slot cover.
Hardware options installation
80