Hewlett Packard Enterprise Apollo 4200 Gen10, Руководство пользователя

Страница: 66 / 159

Hardware options installation
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the Hewlett Packard Enterprise website (
https://www.hpe.com/info/qs).
Introduction
Install any hardware options before initializing the system. For options installation information, see the option documentation.
For system-specific information, use the procedures in this section.
If multiple options are being installed, read the installation instructions for all the hardware options to identify similar steps and
streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components
to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the system before beginning any installation
procedure. Improper grounding can cause electrostatic discharge.
Installing the security bezel
The security bezel helps prevent unauthorized physical access to the front panel components. Install the security bezel and
then lock it with the key provided with the kit.
Drive options
Depending on the configuration, this system supports SAS, SATA, NVMe, and uFF drives. When adding drives to the system,
observe the following general guidelines.
Hardware options installation
66