Hewlett Packard Enterprise Apollo 4200 Gen10, Руководство пользователя

Страница: 146 / 159

• Ability to create custom baselines and ISOs.
• Support for iLO Repository (Gen10 or later iLO 5 nodes only).
• Simultaneous firmware and software deployment for multiple remote nodes.
• Local offline firmware deployments with SPP deliverables.
• Extensive logging in all modes.
NOTE: SUM does not support third-party controllers, including flashing hard drives behind the controllers.
Integrated Smart Update Tools
Integrated Smart Update Tools (SUT) is the smart update solution for performing online firmware and driver updates. SUT is
used with iLO 4, iLO 5, and with update solutions (management appliances such as iLO Amplifier Pack or HPE OneView and
Smart Update Manager (SUM) to stage, install, and activate firmware and driver updates.
The solution must be installed on the operating system, where it updates results through Rich Infrastructure Services (RIS)
communication.
• SUT: Polls iLO to check for requests from SUM or iLO Amplifier Pack for updates through the management network and
orchestrates staging, deploying, and activating updates. You can adjust the polling interval by issuing the appropriate
command-line option provided by SUT. Performs inventory on target servers, stages deployment, deploys updates, and
then reboots the servers.
•
iLO 5 with integrated Smart Update (Gen10 or later servers only): Performs iLO Repository-based updates by
downloading the components from iLO Repository when iLO Installation Queue has the components which can be updated
by SUT.
• iLO Amplifier Pack and HPE OneView: Displays available updates for servers. Communicates with SUT (or SUT 1.x) to
initiate updates using the iLO Redfish interface. SUT reports the status of updates to iLO Amplifier Pack through iLO
Restful Interface.
• SUM: A tool for firmware and driver maintenance for HPE ProLiant servers and associated options.
NOTE: SUM and iLO Amplifier Pack should not manage the same nodes.
Updating firmware from the System Utilities
Use the
Firmware Updates option to update firmware components in the system, including the system BIOS, NICs, and
storage cards.
Procedure
1. Access the System ROM Flash Binary component for your server from the Hewlett Packard Enterprise Support Center.
2. Copy the binary file to a USB media or iLO virtual media.
3. Attach the media to the server.
4. Launch the System Utilities, and select Embedded Applications > Firmware Update.
5. Select a device.
The Firmware Updates screen lists details about your selected device, including the current firmware version in use.
6. Select Select Firmware File.
7. Select the flash file in the File Explorer list.
Software and configuration utilities
146