Hewlett Packard Enterprise Apollo 4200 Gen10 страница 40 Скачать руководство пользователя

Страница: 40 / 159

a. Determine the status of the drive from the NVMe LEDs (NVMe drive components and LEDs).
b. Press the power button.

The Do Not Remove button illuminates and flashes.

c. When the Do Not Remove button stops flashing and the icon on the button is no longer illuminated, press the Do

Not Remove button to release the release lever.

d. Pull the release lever to disengage the drive from the backplane, and slide the drive out of the drive bay.

• Remove a uFF drive

a. Observe the LED status of the drive and determine if it can be removed (SFF flash adapter components and LED

definitions).

b. Remove the drive.

Remove the system from the rack

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power supplies, and internal system
components to cool before touching them.

Operations

Содержание Apollo 4200 Gen10
































































































































































Результаты поиска

Содержание Apollo 4200 Gen10

Отзывы:

Похожие инструкции для Apollo 4200 Gen10

Бренды по названию

Популярные бренды

Hewlett Packard Enterprise Apollo 4200 Gen10, Руководство пользователя

Результаты поиска

Содержание Apollo 4200 Gen10

Отзывы:

Похожие инструкции для Apollo 4200 Gen10

Бренды по названию

Популярные бренды