HERO IGNITOR TECHNO Скачать руководство пользователя страница 43

Страница: 43 / 71

(1) Rear axle nut

•

Turn the adjusting nut clockwise to decrease

the slack or anticlockwise to increase the

slack of the chain.

(2) Sleeve nut (3) Drive chain lock nut

(4) Drive chain adjusting nut (5) Index mark

(6) Rear edge of adjusting slot

•

Rear brake pedal free play is affected when

repositioning the rear wheel to adjust drive

chain slack. Check rear brake pedal free

play and adjust as necessary

(page 42)

•

Tighten the rear axle nut and sleeve nut.

must be replaced.

Sleeve nut torque: 4.2 kgf-m.

Lubrication

•

Check the drive chain slack again.

•

Turn the engine “OFF”, park the vehicle on

its main stand and shift the transmission into

neutral.

Rear axle nut torque: 5.2 kgf-m.

•

Lubricate the drive chain by applying liberal

amount of SAE#90 oil.

CAUTION

Regular adjustment and lubrication as per the

maintenance schedule would ensure high

performance and longer life.

NOTE

Visit

Authorised Distributor/Dealer

for inspection, cleaning, lubrication and

adjustment of drive chain at every 2000 km

•

Align the chain adjuster index mark (5) with

the rear edge (6) of the adjusting slots on

both sides of the swing arm equally.

•

If the drive chain slack is excessive when the

rear axle is moved to the farthest limit of

adjustment, the drive chain is worn and

chain slider must be replaced if it is worn to the

bottom of the cutout or wear limit (2) is

Drive chain slider inspection

(Refer to “Maintenance Schedule” on

(page 26

Check the drive chain slider (1) for wear, the

reached. For replacement, visit your

Authorised Distributor/Dealer

Содержание IGNITOR TECHNO








































































Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды

HERO IGNITOR TECHNO, Руководство пользователя

Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды