46
1
3
5 2
7
6
4
(1) Rear brake adjusting nut (2) Brake rod
(3) Brake arm (4) Brake stopper arm
(5) Brake panel (6) Split pin (7) Lock nut
•
Remove the wheel.
•
Pull out the axle (9) and collar (10).
•
Remove the rear axle nut (8).
(8) Axle nut (9) Axle (10) Collar
2.2 kgf-m
•
Reverse the removal procedure
Brake stopper arm nut torque:
Axle nut torque: 5.2 kgf-m
Rear wheel installation
CAUTION
!
!
Always replace used split pins with new ones.
Main/Side stand lubrication
•
Park the vehicle on the level surface.
•
Check the main/side stand return spring for
damage or loss of tension.
•
Check the main stand (1)/side stand (2)
for freedom of movement.
•
Lubricate the side stand pivot if necessary.
•
Make sure the side/main stand is not bent.
9
8
•
Adjust the rear brake
(page 42)
and drive
chain
(page 37)
.
•
After installing the wheel, apply the brake
several times and check for free wheel
rotation when released.
(1) Main stand (2) Side stand
1
2
Tyres
To safely operate your vehicle, your tyres must
be of the proper type and size, in good
The tyres fitted on your vehicles are of
TUBELESS type.
10
Содержание IGNITOR TECHNO
Страница 4: ......