HERO IGNITOR TECHNO Скачать руководство пользователя страница 33

Страница: 33 / 71

Recommended plug: NGK-CPR6EA9

For most riding conditions this spark plug heat

range number is satisfactory. However, if the

vehicle

is going to be operated for

Spark plug inspection

extended periods at high speeds or near

maximum power in hot climates, the spark

plug should be changed to a cold heat range

number, consult Authorised Distributor/

Dealer on this if required.

•

Disconnect the

noise suppressor

cap

(1)

and remove the spark plug

(2)

with the help

of spark plug box wrench provided in the

tool bag.

•

Clean

any

dirt around the spark plug base.

•

Visually inspect the spark plug electrodes

for wear. The center electrode should have

square edges and the side electrode should

not be eroded. Discard the spark plug if

there is apparent wear or if the insulator is

cracked or chipped.

•

Make sure that the spark plug gap is

0.8-0.9 mm using a wire-type feeler

gauge. If adjustment is necessary, bend the

side electrode carefully. Make sure the plug

washer is in good conditions.

0.8-0.9 mm

•

With the plug washer attached, thread the

spark plug in by hand to prevent cross-

threading.

•

Tide Water Oil Co. (India) Ltd.

Manufactured by:

GRADE: SAE 10W 30 SL Grade

Engine oil

•

Savita Oil Technologies Limited.

BRAND: Hero 4T plus

(JASO MA2).

•

Tighten

a new spark

plug 1/2 turn

with

spark plug

wrench to compress the washer.

If you are reusing a plug, it should

only

take

1/8-1/4 turn after the plug seats.

Use only genuine engine oil.

OIL CAPACITY: 0.95 litre

•

Bharat Petroleum Corporation Limited.

(1) Noise suppressor cap (2) Spark plug

Содержание IGNITOR TECHNO








































































Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды

HERO IGNITOR TECHNO, Руководство пользователя

Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды