HERO IGNITOR TECHNO Скачать руководство пользователя страница 13

Страница: 13 / 71

Helmets and eye protection

Additional riding gear

Your Helmet is your most important piece of

riding gear because it offers the best

protection against head injuries. A helmet

should fit your head comfortably and securely.

A bright coloured helmet can make you more

noticeable in traffic, as can reflective strips.

An open-face helmet offers some protection,

but a full-face helmet offers more. Always

were face shield or goggles to protect your

eyes and help your vision.

In addition to a helmet and eye protection, we

also recommend:

•

Sturdy boots with non-slip soles to help

protect your feet and ankles.

•

A two wheeler riding suit or jacket for

comfort as well as protection. Bright

coloured reflective clothing can help make

you more noticeable in traffic. Be sure to

avoid loose clothes that could get caught on

any part of your vehicle.

•

Leather gloves to keep your hands warm

and help prevent blisters, cuts, burns, and

bruises.

If you are involved in a crash

Personal safety is your first priority. If you or

anyone else has been injured, take time to

assess the severity of the injuries and whether

it is safe to continue riding. Call for emergency

assistance if needed. Also follow applicable

laws and regulations if another person or

vehicle is involved in the crash.

Protective apparel

For your safety, we strongly recommend that

injury when you ride.

pants and a long sleeve shirt or jacket

whenever you ride. Take care of loose/

hanging clothes while solo/pillion riding.

Although complete protection is not possible,

Following are suggestions to help you choose

proper riding gear.

wearing proper gear can reduce the chance of

If you decide to continue riding, first evaluate

the condition of your vehicle. If the engine is

still running, turn it off. Inspect for fluid leaks,

check the tightness of critical nuts and bolts,

and check the handlebar, brake levers, brakes,

and wheels. Ride slowly and cautiously. Your

vehicle may have suffered damage that is not

immediately apparent. Have your vehicle

thoroughly checked at a qualified service

facility as soon as possible.

you always wear a helmet which should

conform as per your country standards, in

addition to eye protection, boots, gloves, long

•

Be sure you and your pillion always wear a

helmet, eye protection and other protective

apparel when you ride.

•

Not wearing a helmet increases the chance of

serious injury or death in a crash.

WARNING

Содержание IGNITOR TECHNO








































































Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды

HERO IGNITOR TECHNO, Руководство пользователя

Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды