HERO IGNITOR TECHNO Скачать руководство пользователя страница 28

Страница: 28 / 71

•

Dry the vehicle by wiping with dry soft cloth.

•

Clean the headlamp lens and other plastic

parts using a cloth or sponge dampened

with a solution of mild detergent and water.

•

Wet the vehicle with light water spray. Avoid

directing water to muffler outlets and

electrical parts.

CLEANING AND WASHING OF VEHICLE

Follow the below mentioned steps for washing

the vehicle.

•

Rub the soiled area gently rinsing it

frequently with fresh water.

•

After cleaning spray water thoroughly.

The importance of maintenance

To help you, take proper care of your vehicle,

the following pages include a maintenance

schedule and a maintenance record for regular

scheduled maintenance.

A Well-maintained vehicle is essential for safe

economical and trouble-free riding. It will also

help reduce pollution.

These instructions are based on the

assumption that the vehicle will be used

MAINTENANCE

WARNING

•

Improperly maintaining this vehicle or

failing to correct a problem before you ride

can cause a crash in which you can be

seriously hurt or killed.

•

Always follow the inspection and maintenance

recommendations and schedules in this

owner's manual.

NOTE

•

Do not use high pressure water (or air). It

can damage certain parts of the vehicle.

•

We at dealership take all above mentioned

precautions like recommended detergents

and usage of muffler caps/plugs during

wash to ensure quality wash.

exclusively for its designed purpose. Sustained

high speed operation or operation in

unusually wet or dusty conditions will require

more frequent service than specified in the

maintenance schedule. Consult your

Authorised

Distributor/Dealer

for recommendation

applicable to your individual needs and use.

If your vehicle overturns or is involved in a

crash, be sure your

Authorised Distributor/

Dealer

inspects all major parts, even if you are

able to make some repairs.

Содержание IGNITOR TECHNO








































































Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды

HERO IGNITOR TECHNO, Руководство пользователя

Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды