HERO IGNITOR TECHNO Скачать руководство пользователя страница 54

Страница: 54 / 71

The battery is located behind the right side

cover.

It is not necessary to check the battery

electrolyte level or add distilled water as the

12V-3 Ah (ETZ-4), MF Battery

Location

battery is a

Maintenance Free (sealed)

type.

If your battery seems weak and electrolyte is

leaking (causing hard starting or other

electrical troubles), contact your

Authorised

Distributor/Dealer

Specification

Battery

NOTE

This symbol on the battery means that

this product must not be treated as

household waste.

This symbol on the battery means the

old battery must be returned to your

Authorised Distributor/Dealer as it

must be treated as recyclable material.

•

Battery is a Maintenance Free (sealed) type

and can be permanently damaged if the

sealing strip is removed.

•

An improperly disposed battery can be

harmful to the environment and human

health. Always confirm local regulations for

battery disposal.

Battery storage

•

Ensure the battery leads are properly

connected to the battery terminals during

installation.

•

Always visit your

Authorised Distributor/

Dealer

if you see any symptom of battery

discharge as earliest as possible to get the

battery charged. The battery has a tendency

to discharge rapidly if optional electrical

accessories are fitted on the vehicle.

Battery charging

•

Always ensure the battery is fully charged

before installation.

•

If in case your vehicle is not used for more

then a month remove the battery, fully

charge and store in a cool and dry place.

•

If the battery is expected to be stored for

more then two months, ensure to fully

charge the battery once in a month.

WARNING

•

The battery gives off explosive hydrogen gas

during normal operation.

•

A spark or flame can cause the battery to explode

with enough force to seriously hurt you.

•

Wear protective clothing and a face shield, or

have skilled technician do the battery

maintenance.

Содержание IGNITOR TECHNO








































































Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды

HERO IGNITOR TECHNO, Руководство пользователя

Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды