HERO IGNITOR TECHNO Скачать руководство пользователя страница 48

Страница: 48 / 71

NOTE

Always adjust both the rear shock absorber to

the same position. Use the rear shock absorber

adjustment tool (pin spanner) (1) available in

the tool kit.

Wheel

•

Support the vehicle securely on the main

stand and raise the front wheel off the

ground.

(a) Front wheel removal (Disc type)

•

Remove the speedometer cable (1) by

pressing the tab (2) & pulling cable out

from the speedometer gearbox.

•

Remove the axle (4) and the wheel.

•

Remove the front axle nut (3).

•

Remove the side collar (5) from the wheel.

CAUTION

Do not operate front brake lever when the

wheel is removed.

•

Position the front wheel between the fork legs

by aligning the slot on the speedometer gear

box with the lug on the fork leg and the disc

between the brake pads to avoid damage to

the pads. Insert the axle from the right side

through the fork legs and wheel hub.

•

Install the side collar (1) to the right side of

the wheel hub and then install the

speedometer gear box (2) on the left side of

the wheel hub.

Front wheel installation (Disc type)

(1) Speedometer cable (2) Tab (3) Axle Nut

(4) Axle (5) Side collar

•

Tighten the front axle nut to the specified

torque.

•

After installing the wheel apply the brake

several times and then check if the wheel

rotates freely. Recheck the wheel if the

brake drags or if the wheel does not rotate

freely.

TORQUE : 5.2 kgf-m

(1) Side collar (2) Speedometer gear box

Содержание IGNITOR TECHNO








































































Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды

HERO IGNITOR TECHNO, Руководство пользователя

Результаты поиска

Содержание IGNITOR TECHNO

Отзывы:

Похожие инструкции для IGNITOR TECHNO

Бренды по названию

Популярные бренды