Heras HMD Basic, Руководство пользователя

Страница: 60 / 88

EN – Translation of the original user manual - 2.0 | 2019 60
In this way, it may be verified that the handheld transmitter signal has actually
been received. After 2 seconds the display will then jump back to the menu. By
activating this menu item once again, additional transmitters may be registered
one after another.
If the program does not recognize any valid code within 20 seconds of the
registration process being activated, the display automatically jumps back to the
menu.
Registering key functions 7.11.3
If you do not wish to use the pre-defined key functions from the registering
process described above, but want to define the individual keys and their gate
actions for yourself, a dedicated memory location is used for each key to be
registered.
The registering of the individual key functions of a transmitter can be carried out
using the following menu items.
Menu item Function
3 Register
transmitter
OPEN Program a gate OPEN function
4 Register
transmitter
CLOSE Program a gate CLOSE function
5 Register
partOPEN Program a partOPEN function of the gate (pedestrian
passage)
6 Register
transmitter
SWITCH Program a switchover function (OPEN – STOP – CLOSE –
STOP)
Following selection, the top line of the display shows the function to be registered.
The operator now has 20 seconds to press the required key on the handheld
transmitter. Each individual key function occupies one memory location.
The transmitter coding received with the specific key pressed is stored in the
memory of the control system as a reference value. For 2 seconds the display
RF#: xxxxxxxxxxxx
Pos.: p
 