Heras HMD Basic, Руководство пользователя

Страница: 11 / 88

EN – Translation of the original user manual - 2.0 | 2019 11
2.3 GENERAL SAFETY INSTRUCTIONS
 The operator must read the entire user manual before the gate is used for
the first time. The instructions stated in the user manual must be observed
and complied with. All other forms of use can cause unexpected hazards
and are forbidden.
 It is forbidden to apply the drive unit to gates other than those stated in
this manual, without Heras' permission.
 Applying a third-party drive unit and/or safety edge may affect safety and
will invalidate the CE mark.
 The gate must only be put into use if all safety facilities are in place and
connected, and work properly.
 All faults which might present a source of danger to the user or to third
persons must be eliminated immediately.
 All warnings and safety notices on the equipment must be in place and
clearly legible at all times.
 Closing the gate infill openings in any way, such as by means of banners,
advertising signs etc, is not allowed as this may negatively affect the safe
operation of the gate.
 All alterations or extensions to the gate must be carried out by qualified
personnel using parts which the manufacturer has defined as suitable for
such alterations or extensions. Any failure to comply with these instructions
will be considered as non-compliant behavior and will invalidate the
manufacturer's guarantee, as a result of which the risk entirely transfers to
the user.
 For a double sliding gate, it is strictly forbidden to remove the central slam
support (mounted on the floor in the opening). This is important for the
stability of the gate when closed.
 Improper usage or servicing or ignoring the operating instructions can be a
source of danger for persons, and/or result in material damage.
 If the meaning of any part of these installation and operating instructions is
not clear, then please contact your supplier before you use the equipment.
 The control system may only be installed and commissioned by specialist
personnel familiar with its operating instructions and the currently
applicable health and safety at work regulations as well as the accident
prevention regulations. The instructions and notes in the manual MUST be
observed and complied with.