Heras HMD Basic, Руководство пользователя

Страница: 64 / 88

EN – Translation of the original user manual - 2.0 | 2019 64
Sensor status 7.12.3
The sensor status is displayed under “Diagnosis”, “Sensor status”. The menu
structure is identical to the display in the operating state as shown in the Section
“5.4.2 Sensor display“.
Temperature status 7.12.4
The current temperatures, and the minimum and maximum temperatures that
have occurred in the power electronics, can be shown via the Diagnosis menu.
The display for this can be accessed as follows:
 Menu: “Service Access”, “Password Input”: Enter password
 Menu: “Diagnosis”, “Temperature”, “DC temperature” shows the
temperatures that have occurred in the DC performance module of the
control system. The current temperature, and the minimum and maximum
temperatures since the last reset, are shown.
 Menu: “Diagnosis”, “Temperatures”, activate “RESETMin/Max”, sets the
minimum and maximum value of the displays in question to the current
temperature.
Motor current display 7.12.5
The maximum current from the last motor movement and the maximum motor
current in the power electronics since the reset can be displayed. The display for
this can be accessed as follows:
 Menu: “Service Access”, “Password Input”: Enter password
 Menu: “Diagnosis”, “Temperatures”, “Max. motor current” shows the motor
currents that have arisen in the DC performance module of the control
system. The maximum current from the last motor movement is shown on
the left and the maximum motor current of the power electronics since the
reset is shown on the right.
 Menu: “Diagnosis”, “Motor current”, activate “RESET.MoCurrent” sets the
maximum value of the current display back to 0.
Log system 7.12.6
The log book system is a ring memory with up to 254 entries. The relevant
events of the control system software are permanently stored in the memory with
their reference number and time stamp and are available even after a restart or