Hensel-Visit UV Flash Dry 15/700, Руководство пользователя

Страница: 8 / 48

User manual UV Flash Dry UV Flash Dry UV Flash Dry UV Flash Dry 15/700 15/700 15/700 15/700
8 HENSEL-VISIT GmbH & Co. KG
Safety hints pertaining to the generator
Safety hints pertaining to the generator Safety hints pertaining to the generator
Safety hints pertaining to the generator
The UV Flash Dry System 15/700 is equipped with capacitors which are
charged with a charge of 700 volts. The capacitors store the electrical
power. During flashing, this energy is changed by the flash tube to
radiation.
If a failure occurs inside the generator, it is possible that the changing of
this energy does not happen inside the flash tube but at another place
inside the generator.
Reasons for this can be damage to the electronic parts, faulty cables or
damaged circuit boards. One of the main reasons for an explosion is a
malfunction of the capacitors itself. Should one of the capacitors be
defective, then all other capacitors in line are affected by this defect and
also become damaged. In this case, this would result in the explosion of
all capacitors and other electronic components.
In such a case, the user of the equipment would experience the explosion
as a loud bang. The electrolytes inside the capacitors may leak out of the
housing. This liquid is not toxic.
The metal housing could also become damaged. In our experience, there
is no specific risk for the device’s user who is close to the action.
However, the loud bang of the explosion may lead to health problems.
In an event like this, the flash generator must be immediately
disconnected from the power supply and sent to an authorized customer
service department.