Henny Penny LOV LVG-102, Техническое руководство

Страница: 9 / 98

Model LVG-102, 103, 104
1-5
Problem Cause Correction
OIL LEVEL SECTION
Oil foaming or boiling over vat • Water in oil • At end of a Cook Cycle, drain
and clean vat; add fresh oil
• Improper or bad oil • Use recommended oil
• Improper filtering • Refer to the procedure
on filtering the oil
• Cold zone (bottom of vat) • Filter oil
full of crumbs
• Improper rinsing after • Rinse the vat thoroughly to remove
cleaning the fryer any cleaning agent in the vat
Oil will not drain from vat • Drain valve clogged with • Open valve, using cleaning brush,
force crumbs through drain valve
• Faulty actuator • Replace actuator
• Oil channel clogged • Access the clean-out plug on the
sides of the unit (see Oil Channel
Clean-out Section)
Oil leaking • Obstruction in drain • Remove obstruction
through drain valve
• Faulty drain valve • Replace drain valve
Vat is under-filled • Locations with RTI, the • The RTI system can be discon-
3-way valve is stuck open nected until RTI repairs the valve
• JIB is low or empty • Fill the JIB
• JIB oil line is clogged or • Check JIB line
collapsed
Bubbles in oil during • Filter pan needs cleaned • Clean filter pan and change pad
entire filtering process
• Filter pan not completely • Make sure filter pan return line is
engaged pushed completely into the receiver
on the fryer
• Filter pan clogged • Clean pan and change pad
• Damaged o-ring on filter • Change O-ring
line tube on fryer
Feb. 2011