Henny Penny LOV LVG-102 Скачать руководство пользователя страница 65

Страница: 65 / 98

Model LVG-102, 103, 104

8-1

8-1. INTRODUCTION

This section lists the replaceable parts of the Henny Penny

Model LVG fryer.

8-2. GENUINE PARTS

Use only genuine Henny Penny parts in your fryer. Using a

part of lesser quality or substitute design may result in damage

to the unit or personal injury.

8-3. WHEN ORDERING PARTS

Once the parts that you want to order have been found in the

parts list, write down the following information:

Item Number

Part Number 60241

Example:

Description High Limit

From the data plate, list the following information:

Product Number 01100

Serial Number 0001

Example:

Voltage 208

8-4. PRICES

Your distributor has a price parts list and will be glad to inform

you of the cost of your parts order.

8-5. DELIVERY

Commonly replaced items are stocked by your distributor and

will be sent out when your order is received. Other parts will

be ordered, by your distributor, from Henny Penny Corp.

Normally, these will be sent to your distributor within three

working days.

8-6. WARRANTY

All replacement parts (except lamps and fuses) are warranted

for 90 days against manufacturing defects and workmanship.

If damage occurs during shipping, notify the carrier at once so

that a claim may be properly filed. Refer to warranty in the

front of this manual for other rights and limitations.

Recommended replacement parts, stocked by your distributor,

are indicated with

√

in the parts lists. Please use care when

ordering recommended parts, because all voltages and

variations are marked. Distributors should order parts based

upon common voltages and equipment sold in their territory.

8-7. RECOMMENDED

SPARE PARTS FOR

DISTRIBUTORS

July 2008

SECTION 8. PARTS INFORMATION

Содержание LOV LVG-102



































































































Результаты поиска

Содержание LOV LVG-102

Отзывы:

Бренды по названию

Популярные бренды

Henny Penny LOV LVG-102, Техническое руководство

Результаты поиска

Содержание LOV LVG-102

Отзывы:

Бренды по названию

Популярные бренды