Henny Penny LOV LVG-102, Техническое руководство

Страница: 14 / 98

Model LVG-102, 103, 104
2-1
SECTION 2. INFO, FILTER & TEMP BUTTON STATS
2-1. INFO BUTTON STATS Recovery Information for each Vat/OQM Information
1. Press and release and REC shows in left display and
the recovery time that oil temperature went from 250°F
(121°C) to 300°F (149°C) shows in the right display. For
example, means it took 5 minutes and
30 seconds for the oil temperature to recover to 300°F
(149°C) from 250°F (121°C).
Pressing the button twice shows the 2nd language, if
programmed.
If no buttons are pressed within 5 seconds in any of stats
modes, the controls revert back to normal operation.
1a. Press and release , the display will show the last TPM
reading, date of the last TPM reading, and time stamp of last
TPM reading (only if OQM sensor is installed and enabled).
Cook Cycles Remaining before Filtering
1. Press and release either or and left display
shows “COOKS REMAIN” and right display shows the
number of cook cycles before the next auto filter. For
example,
means after 3 more cook cycles on the left vat, the controls
ask operator if they are ready to filter or not. But, 6 more
cook cycles remain on the right vat.
Time and Date
2. Press either or twice and time-of-day and date
shows in the displays.
Filter Pad Usage
3. Press either or three times and number of hours
the present filter has been used is hown in the displays.
Actual Oil Temperature
1. Press and the actual oil temperature shows in the
display, for each vat.
Set-point Temperature
2. Press twice and SP shows in the display, along with
the set-point (preset) temperature of each vat.
REC 5:30
2-2. FILTER BUTTON STATS
2-3. TEMP BUTTON STATS
REMA IN 3 6
May 2016